Ratio end mills RF 100 U

1 to 24 of 54 total

Ratio end mills standard RF 100 U
  • Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527K
    Standard: DIN 6527K
    Standard: DIN 6527K
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: B
    Form: B
    Form: B
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): short
    Picto lenght (Article No.): short
    Picto lenght (Article No.): short
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
SKU: 5534 Diameter range:
6,000 - 20,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527L
    Standard: DIN 6527L
    Standard: DIN 6527L
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: A
    Form: A
    Form: A
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
SKU: 5735 Diameter range:
4,000 - 25,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527L
    Standard: DIN 6527L
    Standard: DIN 6527L
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: B
    Form: B
    Form: B
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
SKU: 5535 Diameter range:
4,000 - 25,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 5582 Diameter range:
10,000 - 25,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527K
    Standard: DIN 6527K
    Standard: DIN 6527K
  • Surface: bright
    Surface: bright
    Surface: bright
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: B
    Form: B
    Form: B
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): short
    Picto lenght (Article No.): short
    Picto lenght (Article No.): short
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
SKU: 3200 Diameter range:
6,000 - 20,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527K
    Standard: DIN 6527K
    Standard: DIN 6527K
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: A
    Form: A
    Form: A
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): short
    Picto lenght (Article No.): short
    Picto lenght (Article No.): short
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
SKU: 6706 Diameter range:
3,000 - 20,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527K
    Standard: DIN 6527K
    Standard: DIN 6527K
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: B
    Form: B
    Form: B
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): short
    Picto lenght (Article No.): short
    Picto lenght (Article No.): short
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
SKU: 3731 Diameter range:
3,000 - 20,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527L
    Standard: DIN 6527L
    Standard: DIN 6527L
  • Surface: bright
    Surface: bright
    Surface: bright
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: A
    Form: A
    Form: A
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
SKU: 3208 Diameter range:
4,000 - 25,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527L
    Standard: DIN 6527L
    Standard: DIN 6527L
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: A
    Form: A
    Form: A
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Product logo: GTC
    Product logo: GTC
    Product logo: GTC
SKU: 3736 Diameter range:
3,000 - 25,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527L
    Standard: DIN 6527L
    Standard: DIN 6527L
  • Surface: bright
    Surface: bright
    Surface: bright
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: B
    Form: B
    Form: B
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
SKU: 3201 Diameter range:
4,000 - 25,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: DIN 6527L
    Standard: DIN 6527L
    Standard: DIN 6527L
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Form: B
    Form: B
    Form: B
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): long
    Picto lenght (Article No.): long
    Picto lenght (Article No.): long
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Product logo: GTC
    Product logo: GTC
    Product logo: GTC
SKU: 3732 Diameter range:
3,000 - 25,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: bright
    Surface: bright
    Surface: bright
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 3209 Diameter range:
10,000 - 25,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
    Connection code machine side: ~DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
    Picto lenght (Article No.): extra long
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
    Picto feed (Article No.): without_drilling
SKU: 3627 Diameter range:
10,000 - 25,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
    Connection code machine side: DIN 6535-HA
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.
  • Surface: FIRE
    Surface: FIRE
    Surface: FIRE
  • Cutting direction: right-hand
    Cutting direction: right-hand
    Cutting direction: right-hand
  • Type: N
    Type: N
    Type: N
  • Tool material: Solid carbide
    Tool material: Solid carbide
    Tool material: Solid carbide
  • No of cutting edges: 4
    No of cutting edges: 4
    No of cutting edges: 4
  • (Variety): ≤ 48
    (Variety): ≤ 48
    (Variety): ≤ 48
  • Helix angle: 35/38
    Helix angle: 35/38
    Helix angle: 35/38
  • Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
    Picto chamfer (Article No.): 45
  • Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
    Picto Helical (Article no.): helix
  • Picto lenght (Article No.): medium
    Picto lenght (Article No.): medium
    Picto lenght (Article No.): medium
  • Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
    Picto grooving (Article No.): slotting
  • Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
    Picto Ramping (Article No.): ramping
  • Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
    Picto back rake angle (Article No.): 4
  • Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
    Picto finishing (Article No.): finishing
  • Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
    Pikto Roughing (Article No.): roughing
  • Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
    Picto feed (Article No.): with_drilling
  • Product logo: GTC
    Product logo: GTC
    Product logo: GTC
SKU: 3837 Diameter range:
6,000 - 20,000 mm
To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation.
Ratio end mills standard RF 100 U
  • Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
    Connection code machine side: DIN 6535-HB
  • Tolerance on Ø: h10
    Tolerance on Ø: h10
    Tolerance on Ø: h10
  • Internal cooling: without
    Internal cooling: without
    Internal cooling: without
  • Standard: Company std.
    Standard: Company std.
    Standard: Company std.